christmas kitchen window square

Disclosure: this post may contain affiliate links, which means I may make a commission if you decide to make a purchase through one of my links, at no cost to you.

I’m actually very excited to be sharing this post with you today. I finally have my kitchen window finished, and it’s all decked out for the holidays! Below, I’ve also got tons of details on how I created this faux Roman shade, no sewing skills required!

christmas kitchen window

christmas kitchen window details

This year, I teamed up with 17 other bloggers to share some holiday vignette ideas as part of the Deck the Halls DIY-Style Tour, hosted by Jen from The House of Wood. There are lots of great mantel projects going on that you should check out, but since my living room mantel is about 80% television these days, I thought I’d do something a little different and look to another spot in the house that I’ve always wanted to decorate for Christmas.


This faux Roman shade has been a long time coming. Now that it’s done, I realize that unlike most projects, I was putting this one off for good reason. To be honest, I kind of struggled putting it together! But now that I have a chance to rest my back, I can happily say it was worth it, though hopefully some of this info will help save you some time if you attempt the same project. ;)

christmas kitchen window side view

No Sew Faux Roman Shade

First, I started by looking at a couple of tutorials on how to make an actual Roman shade, but my lazier side won when I saw that some had just tacked the window fabric together to look like a proper shade instead of making it functional. Since I don’t plan on using the shade itself, that seemed easier, but I underestimated my lack of patience with learning how to pin folds just so. Honestly, I think it would have gone much easier if I hadn’t been working with this particular fabric, but I went with it because it was inexpensive and I had been on kind of a long search to find it.

1. Only one yard needed!

Surprisingly, black and white stripes of this width were hard to find; I had been casually looking whenever I went to a store that had fabric, but kept coming up empty-handed. I finally found some $7.99 per yard at Ikea and wound up using just one yard to put it together.

ikea black white stripe fabric

The main challenge was that the fabric was heavyweight upholstery, so I wasn’t used to working with it much. The wrinkles were hard to get out, and I found myself struggling to find the right balance between ironing it thoroughly and avoiding the consequences of pressing too long…

too hot iron scorch mark

I swear, someday I’ll have this adulting thing figured out.

2. Hem tape

Anyway, I used some Heat n’ Bond to make the curtain no-sew. Starting with the edge that was pre-cut (so I was working from a straight line), I simply measured 3/4″ extra on the sides and bottom so that it was wider than my window (because the Heat n’ Bond was 3/4″ wide, so I’d need that much extra when folding over the sides).

how to use heat n bond

It’s actually pretty easy to use; you just fold the fabric over and press with a hot iron to get your crease, then tuck the Heat n’ Bond into the fold and press again. The strip melts the two sides together, and boom: you’ve got your clean edge. I could have folded it over a second time to get a more perfect-looking hem on the back, but I didn’t for three reasons:

  1. that would have made the edge a lot thicker than I wanted
  2. it seemed like overkill for a curtain facing my back yard (I mean, no one’s going to see the back much!)
  3. and most importantly: I wasn’t in the mood to re-cut and add another 3/4″ all the way around

how to use heat n bond

3. Create the window mounting

Once I had the fabric done on the three sides that would be exposed, I wrapped the top around a scrap piece of 1×2 furring strip that I had in my garage, and then went about trying to get it attached inside of the window frame. Since this proved to be kind of difficult keeping it perfectly straight while trying to simultaneously drill the ends into the frame with the other hand, I worked out a small solution to be my extra hands.

use nails to help when you need extra hands

By tacking up a couple of extra nails on the sides of the window, I could rest the wood in place (resting on top of the nails) and concentrate on drilling several 2″-long screws vertically through the furring strip and into the window frame (I recommend pre-drilling as well to keep the furring strip from splitting, but with inexpensive scrap wood like this, there’s a chance that will happen anyway).

Black and white shade

4. Gather and pin

Once attached, I began the process of gathering the fabric and pinning in various places to create my loops and folds to create the Roman shade look (the pins are visible up close, but you can’t really see them if you aren’t looking for it). This part took longer than I thought, and I realized that I might have had better luck creating the folds first and then hanging it, but I originally decided against it because I worried that the pins would come loose as I wrestled with getting it into place (plus, working with stripes can make it really obvious if something’s not hanging just right, and I didn’t want to have to take it down a second time if it was wrong). I suppose either method can work, so just do what makes sense to you. My decision was kind of also made for me since I couldn’t find my pins until after hanging it up; because of course that’s how losing things work!

christmas kitchen window curtain

Decorating the Kitchen for Christmas in Classic Red and Gold

After the shade was up, the rest of the window came together quickly. I had most of the stuff on hand already (source list below), and sprinkled in one or two new items, like the petite berry wreath (which I hung with a clear command hook for easy removal later) and the shiny red reindeer on the right. My kitchen, unfortunately, doesn’t get a lot of light from the rest of the room (the windows are pretty much all on one side), so I really wish the photos had turned out a little better. (Maybe Santa will bring me a lighting kit for Christmas?)

poinsettias black friday kitchen

christmas kitchen window snowflake ornament

Whenever I need something a little extra for filling in blank spaces, I like to use items from the dollar store. Originally, the glittery pine cones and such were part of a fake poinsettia stem, which I took apart for other decor in the house.

dollar store poinsettia stem

Usually, it’s pretty easy to disassemble; just find the base of the piece that you want and yank. If something is hot glued onto a stem, wire cutters will do the trick.


There you have it! I am really happy with the result, and the striped shade will be around permanently… or until I decide to try another round and improve on the look. Since this was my first time creating it, there are things I would do better if I did it over again, but I’m satisfied enough for now to just move on. There’s lots more decorating to do yet!

christmas kitchen window closeup

Source list:
  • Small wreath: T.J.Maxx
  • Window fabric: Ikea
  • Small trees: Walmart
  • Red reindeer: T.J.Maxx
  • Lacy glitter tree: I forget, I’ve had it for a long while
  • Large red ball ornaments: Target
  • Snowflake and star ornaments: Target
  • Pinecones, small bits, small silver ornaments: Dollar Tree
  • Poinsettias: Home Depot (Black Friday 99-cent deal!)

Don’t forget to pin!

no sew faux roman shade

More Christmas Ideas

We’ve got lots of Christmas content here at the UDH: family stories that might make you laugh, DIY decor ideas for your holiday trimmings, recipes, Christmas decor themes throughout the years, and easy DIY gift ideas to name a few!

Similar Posts

Leave a Reply

Comment Policy: I love comments, especially if they make me laugh. Feel free to let your words of wisdom and humor fly (there's no swear jar on this blog), but if you're overly spammy, rude, or just plain boring, you're just going to have to accept that your comment may not see the light of day. P.S. If you leave an affiliate or monetized link when making a comment on this site, such links might get overwritten by a plugin I have installed that uses my own internal tracking. See terms and disclosure page for more info! Thanks in advance. You rock.

This site uses Akismet to reduce spam. Learn how your comment data is processed.


  1. Love your window decorations!! I think it’s time to replace my many-years-old kitchen window bistro shade with some fresh fabric. If the pins bug you (they’re practically invisible) could you color them with a black sharpie?

    1. I thought about using a black Sharpie, just didn’t get around to it by the time I took the pics. That could totally work!

  2. I love the way your shade turned out. The black and white stripes look so beautiful with the subway tile.

  3. We have a faux shade on our kitchen window, too! My mom sewed it for me, and I pinned it until the next time she visited (we live about 3.5 h flight from each other), when she fixed it. My mom is an incredible seamstress and very good with fiddly things; I am less so. Even my imperfect job was so hard. Yours looks great!!

    ps–Ironing with a damp white cloth between the iron and the fabric might help with the scorch marks.

    1. Thanks for the tip! I definitely tried steam, but since I still have more of the fabric (possibly for other uses in the house), I’ll try a damp cloth next time!

  4. Love the look, the color of the shade, the tile – well, just everything! Great job! I enjoy reading your blog and seeing your latest creations/home improvements.

  5. I have an almost exact look with your kitchen window. The black and white stripes really look good on it. I was planning to do this project only on a floral fabric perhaps? and the Heat n’ Bond you used was also such a good idea. Thanks for sharing, Sarah!

  6. your window looks very Nordic – i love it! i kept going back to look and each time I’d see something new. great job!

    1. It honestly took a lot of playing with the fabric to get the folds where I wanted them. I basically created a loop by grabbing the fabric on either side and folding it under fabric above it, creating a loop on the bottom. I then pinned the fabric where it doubled up (going through both layers with the pin). I pinned through the black stripes because it was less visible. Once I got the first loop looking how I wanted, I repeated the process for a second loop. Hope that helps!

  7. `I have been wanting Roman Shades for a long time, but have never found anything I thought I was smart or talented enough to figure out how to do them. Your look great and I think I can do them. Just wondering if the Heat and Bond tape could somehow be used to fasten the back of the loops together.

    1. There’s no reason to think they can’t; some tutorials I’ve seen have actually used the Heat n Bond to tack them together. But due to the weight of this particular fabric, that proved to be too frustrating for me to get all the folds to line up, not to mention that it was already hanging before I added the loops (which would have meant taking everything back down, and I didn’t want to bother). Hope yours turn out great!